Lesson 6-

As arrived to the classroom everyone else had completed a lot more than i had because i had missed a lesson but it was fine because Sabrina and Hattie helped me with what I had missed! Today we got to peel of our paper from the plastic and we got to use this heater to heat the plastic of our stearer for the car by melting it Into it so it had handles. I then sanded down the base of the car and we ran out of time:( I really enjoyed this lesson!

Lesson 5-

I was absent from school!

Lesson 4-

we got given a pack of what electrical stuff we need for a car and today we started to assemble it. I was partners with Sabrina , I thought we worked really well this lesson! Except we unfortunately didn't finish our assembling so I aim to get it finished next lesson.

Lesson 3-

Today I got to drill my holes in my base and make my handle for the project. To make the handle I had to get another piece or colored plastic and drill 2 holes again but with a different type of machinery! This lesson was great because I got a lot of work done!

Lesson 2-

Today we started to work on our car projects, this is what we started off:
1. We got a colored piece if plastic and traced a sample of the outline of the base of the car.
2. We cut it out with a machine.
3. Sanded the edges of the car!


For our next lesson I aim to finish to drill me holes! It was a great lesson because we got to use all the tools in the work shop:)